interestingly, magnesium anodes are much more difficult to find, even in the
chandleries serving fresh water sailing
From: Sam Salter via CnC-List
Sent: Thursday, December 25, 2014 2:02 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List C&C 26 Prop & Zinc
I was using "zincs" as a collective noun.Magnesiums or Aluminums doesn't trip
off the to tongue like "zincs ".
sam :-)
From: Letsgo Sailing
Sent: Thursday, December 25, 2014 9:45 AM
To: sam.c.sal...@gmail.com; cnc-list@cnc-list.com
Subject: RE: Stus-List C&C 26 Prop & Zinc
You have to keep in mind zinc is for salty waters, for fresh water you need to
use magnesium or at least cast aluminum.
Merry Christmas to all.
Yanni Boatless in Ontario
Not for long…
92 Lebaron 3.0 convertible
95 LeBaron 3.0 turbo convertible
90 Dodge Spirit soon to be turbo
07 Yamaha Straotoliner S
SCRC 011059
SRO 26-6483
TURBO!!!!!cause bottles are for babies and superchargers blow!!!
Which would you rather have, go fast goodies or shiny shoes?
Your feet may look good but if your engine blows you ain't going nowhere
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Sam Salter
via CnC-List
Sent: December 24, 2014 11:06 AM
To: CnC
Subject: Re: Stus-List C&C 26 Prop & Zinc
My zincs are spherical with a 7/8" hole. Yours may have a different shaft size
so check.
They are available at any chandlery.
If you have to replace the prop, this might be the time to upgrade to a folder.
I recently replaced mine with a 2 blade Flexofold. Better speed under sail in
light air, improved reverse thrust.
Not cheap, but if you have to replace anyway, you're partway there anyway.
My shaft is 7/8" with an SAE standard taper for the prop.
sam :-)
C&C 26 Liquorice
Ghost Lake Alberta
From: Dan via CnC-List
Sent: Wednesday, December 24, 2014 8:17 AM
To: CnC-List@cnc-list.com
Reply To: Dan
Subject: Stus-List C&C 26 Prop & Zinc
Diver who cleaned the hull of my C&C says I need to change out the zinc and
replace the prop. The prop had buildup and while clean now has the residue
that will enhance further growth. The since is just normal wear and need
replacing.
Anyone have any idea where to find both the prop and zinc?
Merry Christmas Everyone!!
Dan
--------------------------------------------------------------------------------
_______________________________________________
This List is provided by the C&C Photo Album
Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go bottom of page
at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
_______________________________________________
This List is provided by the C&C Photo Album
Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go bottom of page
at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
