Not hard to find here. http://www.boatzincs.com/shaft-magnesium.html On Dec 25, 2014 2:56 PM, "Marek Dziedzic via CnC-List" < cnc-list@cnc-list.com> wrote:
> interestingly, magnesium anodes are much more difficult to find, even > in the chandleries serving fresh water sailing > > *From:* Sam Salter via CnC-List <cnc-list@cnc-list.com> > *Sent:* Thursday, December 25, 2014 2:02 PM > *To:* cnc-list@cnc-list.com > *Subject:* Re: Stus-List C&C 26 Prop & Zinc > > I was using "zincs" as a collective noun. > Magnesiums or Aluminums doesn't trip off the to tongue like "zincs ". > sam :-) > *From: *Letsgo Sailing > *Sent: *Thursday, December 25, 2014 9:45 AM > *To: *sam.c.sal...@gmail.com; cnc-list@cnc-list.com > *Subject: *RE: Stus-List C&C 26 Prop & Zinc > > > You have to keep in mind zinc is for salty waters, for fresh water you > need to use magnesium or at least cast aluminum. > > Merry Christmas to all. > > > > Yanni Boatless in Ontario > > Not for long... > > > > 92 Lebaron 3.0 convertible > > 95 LeBaron 3.0 turbo convertible > > 90 Dodge Spirit soon to be turbo > > 07 Yamaha Straotoliner S > > SCRC 011059 > > SRO 26-6483 > > > > TURBO!!!!!cause bottles are for babies and superchargers blow!!! > > Which would you rather have, go fast goodies or shiny shoes? > > Your feet may look good but if your engine blows you ain't going nowhere > > > > > > *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *Sam > Salter via CnC-List > *Sent:* December 24, 2014 11:06 AM > *To:* CnC > *Subject:* Re: Stus-List C&C 26 Prop & Zinc > > > > My zincs are spherical with a 7/8" hole. Yours may have a different shaft > size so check. > > They are available at any chandlery. > > If you have to replace the prop, this might be the time to upgrade to a > folder. I recently replaced mine with a 2 blade Flexofold. Better speed > under sail in light air, improved reverse thrust. > > Not cheap, but if you have to replace anyway, you're partway there anyway. > > My shaft is 7/8" with an SAE standard taper for the prop. > > > > sam :-) > > C&C 26 Liquorice > > Ghost Lake Alberta > > > > *From: *Dan via CnC-List > > *Sent: *Wednesday, December 24, 2014 8:17 AM > > *To: *CnC-List@cnc-list.com > > *Reply To: *Dan > > *Subject: *Stus-List C&C 26 Prop & Zinc > > > > Diver who cleaned the hull of my C&C says I need to change out the zinc > and replace the prop. The prop had buildup and while clean now has the > residue that will enhance further growth. The since is just normal wear > and need replacing. > > > > Anyone have any idea where to find both the prop and zinc? > > > > Merry Christmas Everyone!! > > > > > > > > Dan > > > > > > > ------------------------------ > _______________________________________________ > This List is provided by the C&C Photo Album > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go bottom of > page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > > _______________________________________________ > This List is provided by the C&C Photo Album > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go bottom of > page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > >
_______________________________________________ This List is provided by the C&C Photo Album Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
