Mine is balanced under power. No pull either way. If you do you may have other issues.
David F. Risch (401) 419-4650 (cell) Date: Wed, 26 Aug 2015 13:43:42 -0400 To: cnc-list@cnc-list.com Subject: Re: Stus-List Autopilot steering From: cnc-list@cnc-list.com CC: davidakne...@gmail.com Calling Raymarine was my first action and I am waiting for a call back. But what I really want to know from the group is whether the relatively strong pull to port while motoring is normal or whether neutral helm is normal. Dave Aries1990 C&C 34+New London, CT On Aug 26, 2015, at 1:03 PM, David via CnC-List <cnc-list@cnc-list.com> wrote:yep...call Raymarine David F. Risch (401) 419-4650 (cell) Date: Wed, 26 Aug 2015 12:52:24 -0400 To: cnc-list@cnc-list.com Subject: Re: Stus-List Autopilot steering From: cnc-list@cnc-list.com CC: davidakne...@gmail.com No- It is smooth by hand. No stiffness I have noticed. Aries1990 C&C 34+New London, CT<pastedGraphic.tiff> On Aug 26, 2015, at 12:50 PM, David via CnC-List <cnc-list@cnc-list.com> wrote:Does the steering hang up at all when the autopilot is disengaged? David F. Risch 1981 40-2 (401) 419-4650 (cell) Date: Wed, 26 Aug 2015 12:04:11 -0400 To: CnC-List@cnc-list.com Subject: Stus-List Autopilot steering From: cnc-list@cnc-list.com CC: davidakne...@gmail.com I was on a long cruise last weekend and we ended up motoring for many hours. installed a new Raymarine EV1/ST4000+ wheel pilot last winter and this was the first extended use. I found that it was frequently cutting out while motoring (not sailing). The unit would simply freeze up and stop steering while the boat drifted slowly off course. No error on the P70 controller screen until I got an off course warning. I also noticed the wheel pilot getting warm/hot when this was happening which may be why it cut out.I also notice that while motoring, there is significant pull on the wheel that has to be fought to keep the boat going straight. Is that normal? I am guessing that the wheel pilot is overheating due to the power needed to continuously fight that pull? Thanks- Dave Aries1990 C&C 34+New London, CT<pastedGraphic.tiff> _______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com_______________________________________________Email address:CnC-List@cnc-list.comTo change your list preferences, including unsubscribing -- go to the bottom of page at:http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com _______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com_______________________________________________Email address:CnC-List@cnc-list.comTo change your list preferences, including unsubscribing -- go to the bottom of page at:http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com _______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
