Whoa, I like this. Must have missed it the first time around. I now tap M3 to toggle between 5W (label: QRP) and 100W (label: QRO) with these macros:
MACRO1 PC005;MN110;SWT12;SWT35;SWT14; MACRO2 PC100;MN110;SWT11;SWT35;SWT14; That freed up (hold) M3 for another macro. TU / 73- Nick, WA5BDU On 7/1/2012 12:35 PM, KU4AF wrote: > Two macros instead of one - that sums up what is needed, but how to call two > macros with one button? I was just fiddling around and came up with this, > though it may not be original. The idea is to let the macro itself reassign > the PF key to a different macro. For example, say you want the PF2 key to > toggle between setting VFO A to 14010 and 14020 (not useful but just an > example). > > Use the Utility to create the two macros like this: > > MACRO1 FA00014010000;MN110;SWT12;SWH47;SWT14; > MACRO2 FA00014020000;MN110;SWT11;SWH47;SWT14; > > Send the Macros to the K3 then, on the K3, go to CONFIG:MACRO X, tap 1 and > then hold PF2. Tap MENU to get out of CONFIG. Now MACRO1 is assigned to PF2. > When you Hold PF2 the macro changes the frequency and then assigns MACRO2 to > PF2. The next operation of PF2 sets a different frequency and sets PF2 back > to MACRO1. > > Substitute whatever you want to toggle between for the FA commands. Put the > two macros in whatever slots you have open and change the SWT11/12 taps to > match. Change SWH47 to match the PF/M button you want to use. You could also > expand on this to rotate among 3 or more macros. > > I expect others can add to this and again, I claim no originality for this > idea. Now, who will be the first to suggest we need more than 8 Macro slots? > > John, KU4AF > Pittsboro, NC > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
