Folks, Ron just pointed out that I had a faulty liink to my website - try http://w3fpr.qrpradio.com instead and excuse my fumble fingers. You can also find a site mirror at http://home.earthlink.net/~w3fpr - sorry for any confusion.
73, Don W3FPR > -----Original Message----- > > Samuel, > > I can only add to what Ron has already stated that in addition to > setting the reference oscillator correctly then running CAL PLL, > you must also run CAL FIL to store the proper BFO values in the EEPROM. > > Take a look at the K2 Dial Calibration article on my website > http://w3fpr.qrprqdio.com for a complete description of the > entire process. The reading is more complex than actually doing > the procedure. > > 73, > Don W3FPR > > > _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com