Hi Tom,

My KNB2 doesen't work either on a lot of things that I consider noise. But, for that particularly nasty type of QRN, the loud crackling that sounds like frying a big pan of bacon, it works superbly. My KNB2 takes that stuff out completely.

If I ever build another K2 (and I'm thinking about doing that) it will include the KNB2 for sure.

73,

John, W2GW

K2/100 #4970, KAT100-1, K1-6 #1205, KX1 #1258, etc.


----- Original Message ----- From: "Tom Skinner" <[EMAIL PROTECTED]>
To: "'Elecraft'" <elecraft@mailman.qth.net>
Sent: Friday, February 17, 2006 4:47 PM
Subject: [Elecraft] Inoperable KNB2


Hello Group,

Well, you can add me to the list of folks who think their noise blanker is
not working.

Now I don't have a lot of noise problems, but do hear the occasional light
dimmer or neighborhood power tool.

I have tried the scratch test, but results were inconclusive.

Today I brought home a 75,000 volt Tesla coil and lit it off across the
room.  As expected, the noise level jumped from S1 to a bit over S9.

The noise blanker has absolutely no noticeable effect in any position.

I have re-inspected the placement of every component and confirmed every
solder joint.  The preps on the RF board were done correctly.

I checked the two diodes and they appear to be neither open nor shorted.

The Tesla coil is probably overkill, but if the noise blanker is working
shouldn't it have SOME effect?

I really don't know what to check next - any suggestions?

TIA es 72/73,

Tom, KJ3D
K2 # 4991

_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com



_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Reply via email to