Carl
I have not experienced any of this type problem. I have my CONFIG:PWR
SET to PER BAND so that the K3s switches power levels depending on if
the KPA1500 is OP/STNBY.
Since you are saying this depends on your output power then would first
look for RF feedback issues. Are you using the Aux cable between
K3s/KPA1500?
Dave K5MWR
On 4/1/2018 2:11 PM, Carl Yaffey wrote:
When running the KPA1500 at full power, sometimes the power will fluctuate.
EXAMPLE: I was checking in to the Elecraft SSB net a little while ago. While
transmitting, the power dropped to around 400W. This has happened on 20M CW as
well. I wonder if the K3S output is dropping. (??).
If I run at 500W or so, no problem.
Carl Yaffey K8NU
Recording studio.
cyaffeyno_s...@gmail.com
614 268 6353, Columbus OH
http://www.carl-yaffey.com
http://www.grassahol.com
http://www.bluesswing.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to do...@suddenlink.net
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
