Did you read W4TV's post on this subject? http://mailman.qth.net/pipermail/elecraft/2018-April/255072.html
Edward McCann ag6cx1 wrote: "But there is also a small black wire that bonds the V- terminal to the case. Should the paint around that screw also be removed???Does that negative rail need to be bonded to the chassis??" I'm trying to figure out the difference between the "case" and the "chassis". Can you help? Jim Brown's answer is also ambiguous to me. He says, yes scrape and attach the V- rail to deal with your black wire if you want to bond V-, but then says don't because the negative rail should not be bonded to the chassis. I quote below: > "But there is also a small black wire that bonds the V- terminal to the case. Should the paint around that screw also be removed? Yes, IF you want to bond V-. > ?Does that negative rail need to be bonded to the chassis? No, and in general, it should NOT be bonded." I also offer I might be out of touch with the subtleties of the concept, and may be interpreting the comments incorrectly. In any event, some clarification would be appreciated What did you finally do? And did it work? Thanks, Ed McCann AG6CX Sent from my iPhone > On Apr 10, 2018, at 11:34 PM, elecraft-request at mailman.qth.net wrote: > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com