Patience my friend... A known issue list will eventually appear. Shades of the Shipping Status ?
73 Stewart G3RXQ On Wed, 06 Feb 2008 07:28:30 +0000, David Ferrington, M0XDF wrote: > Please, I implore Elecraft to publish the known issues list. > Quite a few threads on here, which seem to get into endless debate, are > known issues to Elecraft. I'm sure some people are spending a lot of time > tying to figure out something that doesn't seem quite right, when it is a > known issue. > 73 de M0XDF / K3 #174 > > > On 6/2/08 05:09, "Greg" <[EMAIL PROTECTED]> sent: > >> This is on the issues list already. The change will be to have 100 Hz steps >> below 3.0 kHz and 200 Hz steps above that. >> >> 73 >> Greg >> AB7R >> >> >> -----Original Message----- >> From: [EMAIL PROTECTED] >> [mailto:[EMAIL PROTECTED] Behalf Of Toby Deinhardt >> Sent: Tuesday, February 05, 2008 2:11 PM >> To: G4ILO >> Cc: elecraft@mailman.qth.net >> Subject: Re: [Elecraft] K3 SSB width control >> >> >>> probably can't tell the difference between 2.6 and 2.7 so it's no real >>> hardship to keep the DSP 100z narrower, but it's a bit of a niggle. >>> >> It's rather simple - above 2kHz the K3 uses 200Hz steps and below 2kHz >> steps of 100Hz. >> >> If you tune down from 2.7kHz: 2700, 2500, 2300, 2100, etc. >> >> If you tune up from 1.8kHz: 1800, 1900, 2000, 2200, 2400, 2600, etc. >> >> vy 73 de toby >> _______________________________________________ >> Elecraft mailing list >> Post to: Elecraft@mailman.qth.net >> You must be a subscriber to post to the list. >> Subscriber Info (Addr. Change, sub, unsub etc.): >> http://mailman.qth.net/mailman/listinfo/elecraft >> >> Help: http://mailman.qth.net/subscribers.htm >> Elecraft web page: http://www.elecraft.com >> >> _______________________________________________ >> Elecraft mailing list >> Post to: Elecraft@mailman.qth.net >> You must be a subscriber to post to the list. >> Subscriber Info (Addr. Change, sub, unsub etc.): >> http://mailman.qth.net/mailman/listinfo/elecraft >> >> Help: http://mailman.qth.net/subscribers.htm >> Elecraft web page: http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com