On Tue, 19 Jan 2010, Sebastian Kuzminsky wrote: > Date: Tue, 19 Jan 2010 00:04:57 -0700 > From: Sebastian Kuzminsky <s...@highlab.com> > Reply-To: EMC developers <emc-developers@lists.sourceforge.net> > To: EMC developers <emc-developers@lists.sourceforge.net> > Subject: Re: [Emc-developers] Request for testers: new builds of the hostmot2 > firmware images > > Jeff Epler wrote: >> Off and on I've been working on an unattended build system for the >> hostmot2 firmware images. I think this is now at the point where it >> would be useful for others to test my work. > > Cool! > > >> I've done minimal testing of 5i20 and 7i43-400, but don't have any other >> cards to try. > > I tested 5i20/SVST8_4 and 7i43/SVST4_4S and they both pass all my tests here. > > I tested 3x20/SVST16_24S and it doesn't load the firmware. (Though the BITs > in the emc2.git work fine.) >
I just rebuilt SVST16_24S just to verify that the source is OK and it works. Being unable to reconfig the FPGA usually means that the FPGA is driving some line that messes up the bridge (for example hold-holda or /ready are a couple of fatal pins if driven wrong). When I have that problem, it usually that the .ucf (constraint) file was not used for some reason. In this case the bitfile has its pinout assigned willy-nilly. The pad report can be used to verify that the generated pinout matches the constraints. Peter Wallace Mesa Electronics ------------------------------------------------------------------------------ Throughout its 18-year history, RSA Conference consistently attracts the world's best and brightest in the field, creating opportunities for Conference attendees to learn about information security's most important issues through interactions with peers, luminaries and emerging and established companies. http://p.sf.net/sfu/rsaconf-dev2dev _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers
