By "code" I am referring to an entire g-code file some G0's some G76 etc...
What modal value would effect G76's ability to properly calculate the
feed rate? I should mention that even when it threads at the G0 speed
it does sync with the encoder index pulse.
--- On Sun, 10/5/08, John Kasunich <[EMAIL PROTECTED]> wrote:
From: John Kasunich <[EMAIL PROTECTED]>
Subject: Re: [Emc-users] Unusual Threading Behavior
To: [EMAIL PROTECTED], "Enhanced Machine Controller (EMC)"
<emc-users@lists.sourceforge.net>
Date: Sunday, October 5, 2008, 7:04 PM
richard harris wrote:
> I am running EMC 2.1.0 if the first code I open after loading EMC is a
threading code it will
> operate as I expect. I can run the code 20+ times and it works
perfectly, if I open a different
> threading code it too will work as it should. As soon as I open any code
that does not thread
> run that code and then return to a threading code it will run at my G0
velocity and not the
> appropriate feed rate. This is really an annoying problem, as I thought I
was messing something
> up, I would test the code start running the part and get bad threads took
awhile to realize the
> code is fine as long as it is the first code.
I don't understand what you are saying. What is "open a code".
Does
"code" mean a g-code like G33? Or are you using "code" to
mean an
entire g-code program.
If running one program, then running another one, makes the second one
do something different, then there is some modal value that the second
one uses and the first one is changing.
Unless I am completely missing something.....
Regards,
John Kasunich
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
