>Hello Peter, my problem is claryfying now.
>Since your step driver cards are low performance (5KHz max?) there is really >little advantage to using hardware step generation (Mesa or Pico cards). In >any case you would still need to hand edit the HAL file to set various >stepgen >parameters: steplen, stepspace, dirsetup, dirhold , etc Please, please give me some real v a l u e s to set!!! >Also, are you really sure your step motor drivers use Step & Dir inputs? >If they were designed for quadrature (direct coil drive) you might have >similar symptoms. Yes, at least one of the cards can use both modi, and I was using the clock and direction modus even before which already gave a little more power to the motors. One more word for explanation: You see, I'm not earning any money with my hobby which seems to be different from some people here on this mail group. Purchasing a, say, Mesa 5I20 from the German sales rep., will amount to, considering currency ratio from $ to , sales tax and shipping, about $315 or, in terms of nourishment, 163 liters of beer (45 gallons, and not any, but the best brand). Not that I drank that much, but it makes things more evident... Thanks for the care Peter Blodow ------------------------------------------------------------------------------ This SF.net email is sponsored by: SourcForge Community SourceForge wants to tell your story. http://p.sf.net/sfu/sf-spreadtheword _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
