I'm still loosing on Z by the way, I'm starting to suspect a faulty driver.
2009/9/24 Sven Wesley <svenne.d...@gmail.com> > > Did new tests, and I reeeaaally have to go low on max speed to get things > going correct. > I bought these cards long time ago, but I did expect higher speed even with > an old PC. The computer is super fast with low jitter (about 6800 in latency > at most), the power to the drivers is overkill-to-the-top more than enough, > the servo's are pretty fast too (rated 67 V/10 A) and accelerate good. I had > to go extremely low on max speed to make sure that the mill will reach its > position before next line is executed. Now my max speed is 600 mm/min! The > servo's can easily jog the machine at 12000 and stop hard. > > I'll see if I can make any changes by adjusting the PID, the graphs were > good when I tuned it though but I have very little I-value. > What do you guys think? Time to buy new drivers? > > > ------------------------------------------------------------------------------ Come build with us! The BlackBerry® Developer Conference in SF, CA is the only developer event you need to attend this year. Jumpstart your developing skills, take BlackBerry mobile applications to market and stay ahead of the curve. Join us from November 9-12, 2009. Register now! http://p.sf.net/sfu/devconf _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
