Hello Steve OOPS! I left that out of the description. I called the signals "spindle_cw" and "spindle_ccw".
"net spindle_cw motion.spindle-forward=>hm2-5i23.0.gpio.042.out" Thank you John ________________________________ From: Stephen Wille Padnos <spad...@sover.net> To: Enhanced Machine Controller (EMC) <emc-users@lists.sourceforge.net> Sent: Wed, November 4, 2009 2:41:20 PM Subject: Re: [Emc-users] (no subject) John VanAtta wrote: >Hello Eric > >I have two more questions > >Do have any idea which soft pin link to M3 and M4 for spindle rotation. I >currently have aVFD set up to recive inputs for cw and ccw rotation. I see >there are two types of soft pins (Halui and Motion) and I tried both with no >success.These are the signals I have tried >"net halui.spindle.runs-forward => hm2-5i23.0.gpio.042.out" >and >"c" > > This is the correct pin name, but you're forgetting to specify a name for the net. Try something like this instead: net spindle-fw motion.spindle-forward hm2-5123.0.gpio.042.out You'd have to do something similar with motion.spindle-reverse - Steve ------------------------------------------------------------------------------ Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day trial. Simplify your report design, integration and deployment - and focus on what you do best, core application coding. Discover what's new with Crystal Reports now. http://p.sf.net/sfu/bobj-july _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day trial. Simplify your report design, integration and deployment - and focus on what you do best, core application coding. Discover what's new with Crystal Reports now. http://p.sf.net/sfu/bobj-july _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
