On Wed, 2010-03-10 at 14:11 -0500, Stephen Wille Padnos wrote: ... snip > changer is a carousel. If set true, then it's assumed that max is next > to min and you can get from min to max by going "back" one and wrapping > around. > > Hope this helps. > - Steve
Cool. Thanks. The plan was to assign each tool a value (0 to 1023) corresponding to a position on an absolute encoder, but I may be able to use regular tool numbers and then convert to the encoder values. Thanks. Besides a wiki page. What would be needed to flush out the documentation? Why don't I need an addf to assign modmath to a thread? -- Kirk Wallace http://www.wallacecompany.com/machine_shop/ http://www.wallacecompany.com/E45/index.html California, USA ------------------------------------------------------------------------------ Download Intel® Parallel Studio Eval Try the new software tools for yourself. Speed compiling, find bugs proactively, and fine-tune applications for parallel performance. See why Intel Parallel Studio got high marks during beta. http://p.sf.net/sfu/intel-sw-dev _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
