On Mon, May 16, 2011 at 12:06:06PM -0400, gene heskett wrote: > > My fuss about 2.4.6 is that since I am using (MSG,) and M pauses in my > current setup while carving mortise and tenons joints, is that the MSG > printouts SHOULD be restricted in space to only cover the listing window. > As is, by the end of a run, they are covering the majority of the back-plot > window area too so I cannot glance at it to see where I am in this repeat > run. > So that's fuss #1
Did you know you can clear them all with Ctrl-space? > > Not only that, some are not erasable/deletable as the cli message says they > are not found in the list. > Fuss #2 There is a possible fix for this in the 2.4 branch (after v2.4.6): 73eb96150e It would be great if you'd let us know if it fixes the problem for you. > The only way to get rid of them is to exit & restart emc, which in turn > causes me to have to eventually measure and reset my home positions. IMO, > saving the current machine positions with that optional line in the .INI > file, should also save the HOMED status. That would then lead to a small > loss (max= 1/2 microstep count) per restart that for carving wood, should > not be a part wrecker error. You can disable the requirement that you home: http://linuxcnc.org/docs/2.4/html/config_ini_config.html#sub:[TRAJ]-section > I guess that is probably 3 different fixit requests. 2.4.7 material maybe? There are a lot of important fixes on the 2.4 branch that will be in the final? 2.4 release. ------------------------------------------------------------------------------ Achieve unprecedented app performance and reliability What every C/C++ and Fortran developer should know. Learn how Intel has extended the reach of its next-generation tools to help boost performance applications - inlcuding clusters. http://p.sf.net/sfu/intel-dev2devmay _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
