Steve, I loaded this into a 2.4 system that I use to test Gcode. It ran just like my other programs run. This system is not hooked up to any motors at the moment, but I don't see anything abnormal.
Does the velocity shown on the display drop off when it "almost stops" at the end of each block? Or is the velocity jumping around? I may try and hook some motors to it this afternoon and try it again. I have a little 3 axes stepper machine here that needs to be wired up again anyway. Dave On 7/28/2011 5:17 PM, Steve Blackmore wrote: > On Wed, 27 Jul 2011 10:05:48 -0500, you wrote: > > >> maybe a short sample of gcode that you see causing problems? >> > Here you go Sam > > Code only gets smooth when line > > N190 G64 P0.5 > > half a mm is way too far off, especially when Mach seems to be able to > do easily it at 0.1mm deviation, which I can live with. > > I've read the section on the Q value several times and still don't > understand it! > > N100 G0 G21 G17 G90 G40 G49 G80 > N110 G91.1 > N120 G1 Z20.000 F3600.0 > N130 T1 M06 > N140 (End Mill {6 mm}) > N150 G43H1 Z20.000 > N160 S12000 M03 > N170(Toolpath:- Profile 1) > N180() > N190 G64 > N200 G1 X0.000 Y0.000 F3600 > N210 G0 X-1.974 Y8.147 Z6.000 > N220 G1 X-1.974 Y8.147 Z-1.000 F1200.0 > N230 G2 X-1.346 Y40.813 I1274.739 J-8.173 F3600.0 > N240 G1 X-1.246 Y43.543 Z-1.000 > N250 G1 X-1.175 Y44.975 Z-1.000 > N260 G2 X0.630 Y65.631 I357.751 J-20.852 > N270 G2 X3.629 Y86.169 I356.674 J-41.593 > N280 G1 X3.738 Y86.813 Z-1.000 > N290 G1 X3.885 Y87.608 Z-1.000 > N300 G1 X4.121 Y88.649 Z-1.000 > N310 G1 X4.891 Y91.654 Z-1.000 > N320 G2 X8.045 Y101.818 I125.643 J-33.412 > N330 G2 X12.017 Y111.685 I122.371 J-43.533 > N340 G1 X12.167 Y112.021 Z-1.000 > N350 G1 X12.392 Y112.507 Z-1.000 > N360 G1 X12.836 Y113.360 Z-1.000 > N370 G1 X14.404 Y116.145 Z-1.000 > N380 G2 X48.101 Y150.602 I84.920 J-49.341 > N390 G2 X94.143 Y164.886 I51.247 J-83.839 > N400 G1 X98.585 Y165.027 Z-1.000 > N410 G2 X107.856 Y164.832 I1.550 J-146.800 > N420 G1 X114.650 Y164.312 Z-1.000 > N430 G1 X121.416 Y163.467 Z-1.000 > N440 G1 X124.191 Y163.060 Z-1.000 > N450 G1 X127.048 Y162.615 Z-1.000 > N460 G2 X139.931 Y159.885 I-25.733 J-153.243 > N470 G2 X152.544 Y156.073 I-38.655 J-150.662 > N480 G1 X157.534 Y154.334 Z-1.000 > N490 G1 X161.108 Y153.062 Z-1.000 > N500 G2 X183.667 Y143.969 I-122.738 J-337.027 > N510 G2 X205.551 Y133.371 I-145.209 J-327.734 > N520 G1 X207.732 Y132.276 Z-1.000 > N530 G1 X215.815 Y128.556 Z-1.000 > N540 G1 X219.037 Y127.150 Z-1.000 > N550 G1 X222.272 Y125.782 Z-1.000 > N560 G1 X223.416 Y125.300 Z-1.000 > N570 G1 X223.904 Y125.085 Z-1.000 > N580 G3 X237.774 Y120.073 I38.168 J83.912 > N590 G3 X252.272 Y117.334 I24.318 J88.999 > N600 G1 X253.479 Y117.248 Z-1.000 > > > Steve Blackmore > -- > > ------------------------------------------------------------------------------ > Got Input? Slashdot Needs You. > Take our quick survey online. Come on, we don't ask for help often. > Plus, you'll get a chance to win $100 to spend on ThinkGeek. > http://p.sf.net/sfu/slashdot-survey > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > > ------------------------------------------------------------------------------ Got Input? Slashdot Needs You. Take our quick survey online. Come on, we don't ask for help often. Plus, you'll get a chance to win $100 to spend on ThinkGeek. http://p.sf.net/sfu/slashdot-survey _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users