Andy, greetings > > There is an SVTP7_7i39 bitfile which I believe should arrive with a > apt-get install emc2-firmware (and which you might already have) > The current release (2.4.6) has the bldc_hall3 component, but doesn't > seem to have the three-phase PWM Hostmot2 function so you will need > 2.5 to use the 7i39.
I have installed the emc2-firmware package and in the 5i20 folder the changelog for firmware release 0.8 says there is a 5i20/SVTP_7I39.PIN The actual file installed is SVTP6_7I39.PIN. The changelog says there is a ti23/SVTP6_7I39.PIN. I take it that ti23 is a typo for 5i23. Now for some wild guessing on naming. SV starts ever name, TP = three phase, 6 is a version number and 7i39 is the daughter board expected. If 6 is the version then it sounds as though the released firmware is behind the version (SVTP7_7i39) to which you refer. Release was December 19 2010 by Jeff Epler. I have not yet found where the actual bit files (and VHDL stuff) are stored. Any advice/help welcomed - I have so many unknowns that I at least want to start with the latest versions of everything. Thanks John Prentice ------------------------------------------------------------------------------ Get a FREE DOWNLOAD! and learn more about uberSVN rich system, user administration capabilities and model configuration. Take the hassle out of deploying and managing Subversion and the tools developers use with it. http://p.sf.net/sfu/wandisco-d2d-2 _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
