Hey John I think in your first post you are using the G540, it is 10x micro and as far as I know can't be changed. So your 2 vs 10 should be the 1/5 movement issue. But I am a rookie and will stand down to expert advice. :-)
Dan On 9/17/2011 4:04 PM, John A. Stewart wrote: > James; > >> Welcome to EMC2! I can't answer all of your questions... > Thanks very much for the explanation; it looks like I had some of the > axes going in the wrong way. > > I'm still trying to figure out how I get 1/5 of the movement expected; > ask for 5mm X movement, and I get (via dial indicator) exactly 1mm > movement. Still some stepconf stuff to work out. > > Like everything, it'll be obvious in hindsight.... ;-) > > PS - I'm using the Intel M525DW motherboard, and with hyperthreading > turned off, seems to work absolutely fine. > > JohnS. > > > > ------------------------------------------------------------------------------ > BlackBerry® DevCon Americas, Oct. 18-20, San Francisco, CA > http://p.sf.net/sfu/rim-devcon-copy2 > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ BlackBerry® DevCon Americas, Oct. 18-20, San Francisco, CA http://p.sf.net/sfu/rim-devcon-copy2 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users