On 11/6/2011 9:26 PM, Kirk Wallace wrote: > I'd like to engrave some circuit boards, but I'll need to get or make a > spindle for the project. I would like to be able to have a tool changer, > but I don't recall any tool holders that are appropriate for small high > speed spindles. Any suggestions? > > Part of my plan is to cut a pocket into one of my junk NMTB 40 holders > to mount a small motor (outrunner? but not LRK) with spindle grade > bearings and the appropriate tool holder taper and retainer, making it a > live tool holder. Has anyone seen anything like this? I suppose a draw > bar is going to be a problem. > Wow, Kirk. I'm amazed at the breadth of projects you've talked about.
I came across a nice, if perhaps too general, 2-part discussion that begins with http://www.moldmakingtechnology.com/articles/part-i-spindles-and-their-relationship-to-high-speed-toolholders They don't show any examples of the kind of tooling system you seem to have in mind nor do I recall seeing anything in my random walks around the web. You might try posting your query over in the CNCZone too. Once you've settled on an approach I hope you'll provide pictures for the rest of us to ooh and aah over :-) Regards, Kent ------------------------------------------------------------------------------ RSA(R) Conference 2012 Save $700 by Nov 18 Register now http://p.sf.net/sfu/rsa-sfdev2dev1 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users