the lights and most outlets here at work are single phase wired off of 3 phase.
On Thu, Nov 10, 2011 at 9:50 PM, Brian May <bri...@diezorlich.com> wrote: > This is probably an easy question for alot af the people on the list. > > I have 3 phase power going to my vfd on my machine. I want to the use > that same power to power all the 120 single phase components. (the dc power > supply for the steppers and varios other motors. ). This way i only need 1 > plug > > I have been reading and people say i can go from 1 leg to a nuetral or leg > to leg. I do not have a nuetral line so my question is will it be ok to go > from leg to leg for the 120 single phase? Or is there some other component > i need? > > Thanks > Brian > > Sent from my iPod > > ------------------------------------------------------------------------------ > RSA(R) Conference 2012 > Save $700 by Nov 18 > Register now > http://p.sf.net/sfu/rsa-sfdev2dev1 > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ RSA(R) Conference 2012 Save $700 by Nov 18 Register now http://p.sf.net/sfu/rsa-sfdev2dev1 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
