Dave, It looks similar to that one except it also has a big blue orb on top that is connected to each phase and to a tap on the back of the center coil.
http://imagebin.org/212101 I'll bypass that and let you know how it runs. Thanks John On 5/11/2012 7:18 PM, Dave wrote: > John, > > Sorry for the delay as I have been really busy. > > I looked and I could not find a picture of the exact item. > > Does your reactor look something like this? > > http://support.automation.siemens.com/US/llisapi.dll/23176538?func=ll&objId=23176538&objAction=csViewTD&nodeid0=10803928&lang=en&siteid=cseus&aktprim=0&extranet=standard&viewreg=US&prodLstObjId=23176538&prodLstStart=28141&prodLstSort=-DOCBETREFF > > If so, you should be able to remove that and not cause any problems. > Those are typically used to keep from pumping noise into the powerline. > It sounds like the reactor is interacting with the capacitors on your > phase converter (resonating). > > Not having the reactor in the system may cause a lot of extra current > through the capacitors on your phase converter.. as the high frequency > noise may back up into those capacitors from the drive power section. > > But I would try it out and watch things closely. > > The other option to try and narrow down the problems is to bring in a > big generator and power up your machine on that and see if you still > have problems. > > Dave > > On 5/11/2012 4:02 PM, John Thornton wrote: >> It just gives the same generic error for spindle or an axis. I assume >> the first or last error it has stumbled across. I've had the problem >> more or less since I got this machine. I've replaced all the caps in the >> infeed unit (power supply). The error number translated to drive >> fault... how very informative you know. >> >> Why does the measured voltage change so much after it passes the line >> reactor I think is the question that needs an answer. >> >> John >> >> On 5/11/2012 2:34 PM, Dave Caroline wrote: >> >>> On Fri, May 11, 2012 at 8:24 PM, John Thornton<bjt...@gmail.com> wrote: >>> >>>> What should I look at? >>>> >>> can the drive fault be diagnosed (does it give an error number etc) >>> >>> Dave Caroline >>> >>> ------------------------------------------------------------------------------ >>> Live Security Virtual Conference >>> Exclusive live event will cover all the ways today's security and >>> threat landscape has changed and how IT managers can respond. Discussions >>> will include endpoint security, mobile security and the latest in malware >>> threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ >>> _______________________________________________ >>> Emc-users mailing list >>> Emc-users@lists.sourceforge.net >>> https://lists.sourceforge.net/lists/listinfo/emc-users >>> >> ------------------------------------------------------------------------------ >> Live Security Virtual Conference >> Exclusive live event will cover all the ways today's security and >> threat landscape has changed and how IT managers can respond. Discussions >> will include endpoint security, mobile security and the latest in malware >> threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ >> _______________________________________________ >> Emc-users mailing list >> Emc-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/emc-users >> >> > > ------------------------------------------------------------------------------ > Live Security Virtual Conference > Exclusive live event will cover all the ways today's security and > threat landscape has changed and how IT managers can respond. Discussions > will include endpoint security, mobile security and the latest in malware > threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
