I just pulled that feed rate out of my ear, assuming if you actually tried to cut you would replace it with a feed rate that worked for you.
John On 6/1/2012 5:44 PM, gene heskett wrote: > John T.: I did a short pass with your code, cutting 2 slots. Feed way too > fast, the slots were badly S shaped from bit flex. It sure looked like a > good idea though. Thanks. > > Running a .7" feedrate, it is gradually straightening out the bottoms of > the slots. I also went down to a 45 cycle wheel with the narrowest slot > for the one under construction now, but my calipers are telling me I'll > have to pull the opto's together by at least 50 thou to get good > quadrature. Dunno if I can bend then that far or not. We'll see when this > one is done. I'll see what the duty cycle is as I'd druther go up than > down. > > Cheers, Gene ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users