I've done as little as .0001 -----Original Message----- From: andy pugh [mailto:bodge...@gmail.com] Sent: Wednesday, July 11, 2012 7:15 AM To: Enhanced Machine Controller (EMC) Subject: Re: [Emc-users] Spindle hooked to dc servo amp
On 11 July 2012 13:07, Kasey Matejcek <someo...@lkm.bz> wrote: > But there is no to little control if load is applied to the spindle As > soon as any p,I,g are added then it unstable surging up and down How much Igain are you adding? I would expect it to need to be no higher than 0.05 and I would probably start at 0.001. -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ---------------------------------------------------------------------------- -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users