2012/8/19 John Thornton <bjt...@gmail.com>: > You could roll your own in GladeVCP... have you seen my tutorials on that? >
Yes, I have played a little with Glade. It is really nice, but there is some learning curve for me to climb. I already am over deadline with this machine, so I am interested to spend as little time as possible on this. OTOH that would be nice to create my own standalone gui, since I do not need any g-code preview and other stuff - just few buttons and maybe some other widgets. All those buttons and preview in Axis would only distract the operator as they would not be used. Anyway, I have an issue of reproducing homing routine either in HAL or in Ladder. Can anyone share some advice, how to do that? I do not really understand, how can I reset stepgen position to 0 or whatever fixed value, based on the state of input from homing switch (rising and falling edges, to be precise). There will be some offset between pre-homing and post-homing stepgen positions, which I do not understand, how to handle. Has anyone already done that? -- Viesturs If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
