--- On Sat, 5/4/13, Marius Liebenberg <mar...@mastercut.co.za> wrote:
> From: Marius Liebenberg <mar...@mastercut.co.za> > I run 2.5.2 on that machine. As I mentioned before, I did > change the > motor/encoder but the problem stays. I thought it might be a > damaged > encode because it only effects the feedback in one > direction. > Is halscope the only way to see what the cause could be? It > might be > difficult to see because the error is +/- 1% of the total > travel and in one direction only. What about the wire connection at the controller? Could even be something as mundane as a bad solder joint on the connector or terminal block. ------------------------------------------------------------------------------ Get 100% visibility into Java/.NET code with AppDynamics Lite It's a free troubleshooting tool designed for production Get down to code-level detail for bottlenecks, with <2% overhead. Download for free and get started troubleshooting in minutes. http://p.sf.net/sfu/appdyn_d2d_ap2 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
