On 2013/05/04 06:55 PM, andy pugh wrote: > On 4 May 2013 17:45, Marius Liebenberg <[email protected]> wrote: > >> difficult to see because the error is +/- 1% of the total travel and in >> one direction only. > Is the error in measured position or indicated position?
Andy the position is measured physically. > Does either of the commanded position / actual position show the > expected position (toggle with @, or use the menu, if using Axis) The position shown is the expected position but not the real measured position. It would seem that it could be missing counts in one direction. -- Regards / Groete Marius D. Liebenberg MasterCut cc Cel: +27 82 698 3251 Tel: +27 12 743 6064 Fax: +27 86 551 8029 Skype: marius_d.liebenberg Skype Me^(TM)! <skype:marius_d.liebenberg?call> Get Skype <http://www.skype.com/go/download> and call me for free. --- avast! Antivirus: Outbound message clean. Virus Database (VPS): 130504-0, 2013/05/04 Tested on: 2013/05/05 09:41:35 AM avast! - copyright (c) 1988-2013 AVAST Software. http://www.avast.com ------------------------------------------------------------------------------ Get 100% visibility into Java/.NET code with AppDynamics Lite It's a free troubleshooting tool designed for production Get down to code-level detail for bottlenecks, with <2% overhead. Download for free and get started troubleshooting in minutes. http://p.sf.net/sfu/appdyn_d2d_ap2 _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
