Hi, On 2013-08-07 13:44, Paul Lacatus wrote: > On 07.08.2013 12:35, andy pugh wrote: >> On 7 August 2013 08:30, Paul Lacatus <p...@paul-lacatus.ro> wrote: >> >> The problem with RPI is that the real time kernel modules >> are not implemented and the access to GPIO in not fast enough for Linux >> CNC . This infos I got from the net maybe I am wrong. >> >> Paul >> I've ported the pluto-p-servo driver for RPI per SPI but I'm still working on it (programming the fpga per gpio from the RPI). Also the pluto-step driver has to be done.
The first test looks good with remote-X. be tuned... ;) matsche >> >> ------------------------------------------------------------------------------ >> Get 100% visibility into Java/.NET code with AppDynamics Lite! >> It's a free troubleshooting tool designed for production. >> Get down to code-level detail for bottlenecks, with <2% overhead. >> Download for free and get started troubleshooting in minutes. >> http://pubads.g.doubleclick.net/gampad/clk?id=48897031&iu=/4140/ostg.clktrk >> _______________________________________________ >> Emc-users mailing list >> Emc-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/emc-users -- "In der Wissenschaft siegt nie eine neue Theorie, nur ihre Gegner sterben nach und nach" Max Planck ------------------------------------------------------------------------------ Get 100% visibility into Java/.NET code with AppDynamics Lite! It's a free troubleshooting tool designed for production. Get down to code-level detail for bottlenecks, with <2% overhead. Download for free and get started troubleshooting in minutes. http://pubads.g.doubleclick.net/gampad/clk?id=48897031&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users