2013/8/7 Paul Lacatus <p...@paul-lacatus.ro> > > 1. Is this card ( BBW 720MHz 256 MB ) strong enough for running LinuxCNC > headless ? >
Since you already have the Beagle, I would say that there is only one way to find this out for sure :)) > > 3. If I have already the stepper driver board controlled by LPT port of the > computer did I need and extra hardware of interfacing BeagleBone or a > simple logic level conversion is enough. > Since step/dir signals would be generated by PRUs on Beagle, all you need is make sure about matching signal levels. -- Viesturs If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ Get 100% visibility into Java/.NET code with AppDynamics Lite! It's a free troubleshooting tool designed for production. Get down to code-level detail for bottlenecks, with <2% overhead. Download for free and get started troubleshooting in minutes. http://pubads.g.doubleclick.net/gampad/clk?id=48897031&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users