On Monday 10 March 2014 16:35:32 Gene Heskett did opine: > On Monday 10 March 2014 11:31:19 andy pugh did opine: > > On 10 March 2014 09:59, Gene Heskett <ghesk...@wdtv.com> wrote: > > > I see that in XL they have a 9.5mm width which would fit, but if you > > > hunt around, the GT2 2mm pitch stuff doesn't match at all. > > > > You might find > > http://www.hpcgears.com/n/products/1.pulleys_belts/pulleys_belts.php > > useful. I don't think you would want to buy from them, but the > > catalogue pages for each belt type have a profile drawing and > > measurements. > > Thanks Andy. I grabbed and printed the pages on belts to put n the > shelf, but its a Readers Digest sized image in the middle of a letter > sized sheet despite being told to "fit to page". It will be useful > (with a strong glass) however, thanks for the link. > > Cheers, Gene
Continuing this thread of trying to determine what belt I need to properly fit these pulleys, I have talked to Chris Wood at LMS but he can't help me with anything but OEM parts, so some math based on the gullet od + the tip od on the pulley, half of that to get the "pitch diameter" converted to pitch circumference, then divided by the number of cogs, 30 in this case, give me a pitch length of 4.60mm, and in cycling my digital caliper through its modes, one thing seems to stand out, 3/16". Are there belts made with a 3/16" pitch? This OEM belt that is now too short at 70 cogs, is actually different in cog heights, the old worn belt fitting the new pulleys much better than the new belts I bought, and indeed the old belt, turned wrong side out and fitted to the new one is a just noticeably longer over a 3" straight span, about half a tooths worth, than the new one. The new belts cog height is less than the old one also, by about .16mm. So at best fit, its sitting on the tops of the teeth with lots of daylight under it in the pulleys gullies. I don't recall running across a 4.644844738332509mm (calculated) or so pitch of belt anyplace in my web snooping so far. Ideas? Including me doing it wrong... Do I need to change my brand of toothpicks or what? Thanks & Cheers, Gene -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> ------------------------------------------------------------------------------ Learn Graph Databases - Download FREE O'Reilly Book "Graph Databases" is the definitive new guide to graph databases and their applications. Written by three acclaimed leaders in the field, this first edition is now available. Download your free book today! http://p.sf.net/sfu/13534_NeoTech _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users