Hi everyone If I sound confused, Good I am.
1. how is Xenable triggered, it doesn't appear to be going high 2. Attached is a file called uln2003.hal which is a file I downloaded and have used as a basis for my .hal. It is for a 2 axis 4 wire connection and sets out the pins for A B C an D phases. If he went to 3 axis he would have run out of pins. My setup is a 3 axis, 2 wire connection. The 2 wires require B & C (or A & D) phases and provides the other phases as inversions of the phases provided. The attached BillsMill.hal shows how I have configured the pins ie by just omitting configurations for A & D, I don't know how this will work. 3. I have developed my Gcode files with CNCSimulatorPro but I found out that LCNC cannot read these even though I have saved them as .ngc. Can I convert the files I have or to rewrite them and if so what software will help me produce them. Thankyouall Bill <https://mail.google.com/mail/u/0/?ui=2&ik=98dd5aadd0&view=att&th=14520b2aa6caf83f&attid=0.1&disp=safe&realattid=f_hti40mko0&zw> On Sun, Mar 30, 2014 at 4:14 PM, Marius Liebenberg <[email protected]>wrote: > Sorry about the double posts my mail client said the message was not > sent and it could not save it so I redid the message. > > On 2014-03-30 08:09, Marius Liebenberg wrote: > > Bill > > I looked at your files but I could see nothing obviously wrong with > > them. Did you ever edit these files with a widows based editor? > > It sometime helps to restart the terminal session if you get funnies > > that just happen without explanation. > > > > Please explain the other strange files in your directory, they are a bit > > confusion. > > > > > > On 2014-03-29 09:44, Bill wrote: > >> Thankyou Marius. So simple when you know how > >> > >> > >> > >> Hi everyone, > >> > >> > >> > >> I rewrote my BillsMill.hal based on one in LinuxCNC forum Sept 2012 > >> > >> > >> > >> When I tried to run LCNC, it wouldn't run and gave me an error message > >> > >> > >> > >> The attachment includes that error message together with my LinuxCNC > folder > >> which will give all my settings > >> > >> > >> > >> Thanks for your help > >> > >> > >> > >> Bill > >> > >> > >> > >> > >> > >> -------Original Message------- > >> > >> > >> > >> From: Marius Liebenberg > >> > >> Date: 03/29/14 15:21:00 > >> > >> To: [email protected] > >> > >> Subject: Re: [Emc-users] Error Messages > >> > >> > >> > >> There is a button at the bottom of the screen "Select All" Press that > >> > >> and then open gedit. Right click and paste the contents of the error > screen. > >> > >> > >> > >> > >> > >> On 2014-03-29 05:41, Bill Brettle wrote: > >> > >>> My Mill would not connect and I received a fairly long message entitled > >>> "LinuxCNC Errors" which stated in the header "When reporting > >>> problems,please include all the information below in your message." > >>> However, I cannot copy, print, or in any other may transmit this > >>> information. > >>> ????????????????????????? > >>> Regards Bill [?] > >> > ----------------------------------------------------------------------------- > >> > >> > >>> _______________________________________________ > >>> Emc-users mailing list > >>> [email protected] > >>> https://lists.sourceforge.net/lists/listinfo/emc-users > >> > >> > >> -- > >> > >> > >> > >> Regards /Groete > >> > >> > >> > >> Marius D. Liebenberg > >> > >> +27 82 698 3251 > >> > >> +27 12 743 6064 > >> > >> QQ 1767394877 > >> > >> > >> > >> > ----------------------------------------------------------------------------- > >> > >> > >> _______________________________________________ > >> > >> Emc-users mailing list > >> > >> [email protected] > >> > >> https://lists.sourceforge.net/lists/listinfo/emc-users > >> > >> > >> > ------------------------------------------------------------------------------ > >> > >> > >> _______________________________________________ > >> Emc-users mailing list > >> [email protected] > >> https://lists.sourceforge.net/lists/listinfo/emc-users > > -- > > Regards /Groete > > Marius D. Liebenberg > +27 82 698 3251 > +27 12 743 6064 > QQ 1767394877 > > > > ------------------------------------------------------------------------------ > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users >
BillsMill.ini
Description: Binary data
BillsMill.hal
Description: Binary data
unl2003.hal
Description: Binary data
------------------------------------------------------------------------------
_______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
