kirk they will cut with the glass cutter, however it will not be fun :) alas my panels are made from glass doors as well , got about 6 of em. are you planning on getting a charge controller? i would advise a manufactured panel unless just wanting to experiment. as to cutting several light passes them sandwich between card bord and bend at score. this is how mit recommends doing it , with a bit of practice it can be done fairly well. i also recommend a charge controller to keep from boiling the battery, and 17 volt panel, i would say a 60 watter would do you well they are about 24x30 i have a kyocera and it does very well. i strongly recommend the syl gard to encapsulate them as any other method will burn more time and money to get right than buying 2 panels. hope this helps , good luck
-- jeremy youngs ------------------------------------------------------------------------------ Start Your Social Network Today - Download eXo Platform Build your Enterprise Intranet with eXo Platform Software Java Based Open Source Intranet - Social, Extensible, Cloud Ready Get Started Now And Turn Your Intranet Into A Collaboration Platform http://p.sf.net/sfu/ExoPlatform _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
