i did run emc2.2 live cd and put ini file back it work for 2 min and start give join following error0. what is difference between joint following error 0 from joint following error 1 and joint following error 2
thanks aram On Fri, May 23, 2014 at 11:37 AM, a k <pccncmach...@gmail.com> wrote: > hi > interesting part is that yesterday when i start computer it give error > that i post here. cnc window did not want to open and error was there. > today same computer - everything same - start - open cnc widow with no > problem. > i even turn motor to see if encoder will move - yes and all encoders are > connected right - figures in axis do change. > only when i power machine on i getting ---joint 2 following error ---- > looks like tuning problem but i put all ini file back. > and those ---joint 2 following error ---- activated instantly after power > on machine --F2-- > > why situation change overnight? by them self? > and ---joint 2 following error ---- not just tuning problem but something > else. > How i can do that --their EEPROM > data updated to the current---? > > i am not complaining. thank you for all help. maybe it consumer reflex - > when thing is working it switch happiness On/Off. > > > > > > On Fri, May 23, 2014 at 5:54 AM, Peter C. Wallace <p...@mesanet.com> wrote: > >> On Fri, 23 May 2014, a k wrote: >> >> > Date: Fri, 23 May 2014 04:16:59 -0700 >> > From: a k <pccncmach...@gmail.com> >> > Reply-To: "Enhanced Machine Controller (EMC)" >> > <emc-users@lists.sourceforge.net> >> > To: "Enhanced Machine Controller (EMC)" < >> emc-users@lists.sourceforge.net> >> > Subject: Re: [Emc-users] emc2--2.5 >> > >> > hi >> > i think that the situation where i am now - controller that does not >> work- >> > is good answer to question why i avoid to update to new releases of >> emc2. >> > >> > >> > why data for 5i20 was change during evaluation from 2.25 to 2.5? -it was >> > working on emc2 2.25 just keep it same. >> > >> > so my board 5i20 is useless now - garbage? >> > i have 2 of them! >> >> The 5I20 is unchanged and you can go back to 2.2.5 easily if you saved you >> 2.2.5 installation >> >> The 5I20s that you have are old enough that they may need to have their >> EEPROM >> data updated to the current to be able to rum Hostmot2 firmware, but this >> is >> not clear because At one point you showed an error that indicated a card >> access problem (FPGA reset issue) but then you said that you were able to >> launch linuxCNC >> >> What is the curret situation with running linuxcnc 2.5? >> >> >> Q >> > >> > >> > >> > On Thu, May 22, 2014 at 2:23 PM, a k <pccncmach...@gmail.com> wrote: >> > >> >> what should i do now? >> >> there was reason that i like emc2.2 >> >> >> >> >> >> On Thu, May 22, 2014 at 12:15 PM, Peter C. Wallace <p...@mesanet.com >> >wrote: >> >> >> >>> On Thu, 22 May 2014, a k wrote: >> >>> >> >>>> Date: Thu, 22 May 2014 11:32:08 -0700 >> >>>> From: a k <pccncmach...@gmail.com> >> >>>> Reply-To: "Enhanced Machine Controller (EMC)" >> >>>> <emc-users@lists.sourceforge.net> >> >>>> To: "Enhanced Machine Controller (EMC)" < >> >>> emc-users@lists.sourceforge.net> >> >>>> Subject: Re: [Emc-users] emc2--2.5 >> >>>> >> >>>> i think i know >> >>>> >> >>>> >> >>>> On Thu, May 22, 2014 at 11:29 AM, a k <pccncmach...@gmail.com> >> wrote: >> >>>> >> >>>>> who is PCW? >> >>>>> >> >>>>> >> >>>>> On Thu, May 22, 2014 at 11:18 AM, andy pugh <bodge...@gmail.com> >> >>> wrote: >> >>>>> >> >>>>>> On 22 May 2014 19:06, a k <pccncmach...@gmail.com> wrote: >> >>>>>>> [11380.125103] hm2_5i20.0: firmware: requesting >> hm2/5i20/SVST8_4.BIT >> >>>>>>> [11380.127460] hm2_5i20.0: FPGA did not reset: /INIT = 1, DONE = 1 >> >>>>>> >> >>>>>> OK, so you seem to have a config updated for the new driver, which >> is >> >>>>>> a good start. >> >>>>>> I think we might need PCW to explain the problem above. >> >>>>>> >> >>> >> >>> >> >>> Not sure (especialliy if linuxCNC does load with drivers disabled) >> >>> >> >>> that error by itself may indicate very old EEPROM data on the 5I20 >> >>> >> >>> >> >>>>>> >> >>>>>> -- >> >>>>>> atp >> >>>>>> If you can't fix it, you don't own it. >> >>>>>> http://www.ifixit.com/Manifesto >> >>>>>> >> >>>>>> >> >>>>>> >> >>> >> ------------------------------------------------------------------------------ >> >>>>>> "Accelerate Dev Cycles with Automated Cross-Browser Testing - For >> FREE >> >>>>>> Instantly run your Selenium tests across 300+ browser/OS combos. >> >>>>>> Get unparalleled scalability from the best Selenium testing >> platform >> >>>>>> available >> >>>>>> Simple to use. Nothing to install. Get started now for free." >> >>>>>> http://p.sf.net/sfu/SauceLabs >> >>>>>> _______________________________________________ >> >>>>>> Emc-users mailing list >> >>>>>> Emc-users@lists.sourceforge.net >> >>>>>> https://lists.sourceforge.net/lists/listinfo/emc-users >> >>>>>> >> >>>>> >> >>>>> >> >>>> >> >>> >> ------------------------------------------------------------------------------ >> >>>> "Accelerate Dev Cycles with Automated Cross-Browser Testing - For >> FREE >> >>>> Instantly run your Selenium tests across 300+ browser/OS combos. >> >>>> Get unparalleled scalability from the best Selenium testing platform >> >>> available >> >>>> Simple to use. Nothing to install. Get started now for free." >> >>>> http://p.sf.net/sfu/SauceLabs >> >>>> _______________________________________________ >> >>>> Emc-users mailing list >> >>>> Emc-users@lists.sourceforge.net >> >>>> https://lists.sourceforge.net/lists/listinfo/emc-users >> >>>> >> >>> >> >>> Peter Wallace >> >>> Mesa Electronics >> >>> >> >>> (\__/) >> >>> (='.'=) This is Bunny. Copy and paste bunny into your >> >>> (")_(") signature to help him gain world domination. >> >>> >> >>> >> >>> >> >>> >> ------------------------------------------------------------------------------ >> >>> "Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE >> >>> Instantly run your Selenium tests across 300+ browser/OS combos. >> >>> Get unparalleled scalability from the best Selenium testing platform >> >>> available >> >>> Simple to use. Nothing to install. Get started now for free." >> >>> http://p.sf.net/sfu/SauceLabs >> >>> _______________________________________________ >> >>> Emc-users mailing list >> >>> Emc-users@lists.sourceforge.net >> >>> https://lists.sourceforge.net/lists/listinfo/emc-users >> >>> >> >> >> >> >> > >> ------------------------------------------------------------------------------ >> > "Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE >> > Instantly run your Selenium tests across 300+ browser/OS combos. >> > Get unparalleled scalability from the best Selenium testing platform >> available >> > Simple to use. Nothing to install. Get started now for free." >> > http://p.sf.net/sfu/SauceLabs >> > _______________________________________________ >> > Emc-users mailing list >> > Emc-users@lists.sourceforge.net >> > https://lists.sourceforge.net/lists/listinfo/emc-users >> > >> >> Peter Wallace >> Mesa Electronics >> >> (\__/) >> (='.'=) This is Bunny. Copy and paste bunny into your >> (")_(") signature to help him gain world domination. >> >> >> >> ------------------------------------------------------------------------------ >> "Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE >> Instantly run your Selenium tests across 300+ browser/OS combos. >> Get unparalleled scalability from the best Selenium testing platform >> available >> Simple to use. Nothing to install. Get started now for free." >> http://p.sf.net/sfu/SauceLabs >> _______________________________________________ >> Emc-users mailing list >> Emc-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/emc-users >> > > ------------------------------------------------------------------------------ "Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available Simple to use. Nothing to install. Get started now for free." http://p.sf.net/sfu/SauceLabs _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
