On Fri, 23 May 2014, a k wrote: > Date: Fri, 23 May 2014 14:45:06 -0700 > From: a k <pccncmach...@gmail.com> > Reply-To: "Enhanced Machine Controller (EMC)" > <emc-users@lists.sourceforge.net> > To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> > Subject: Re: [Emc-users] emc2--2.5 > > i did run emc2.2 live cd and put ini file back > it work for 2 min and start give join following error0. > what is difference between joint following error 0 from joint following > error 1 and joint following error 2 > > thanks > aram
Most likely joint folowing error 0 is an error on X joint folowing error 1 is an error on Y joint folowing error 2 is an error on Z I am not at all sure that the PID scaling or even polarity are identical on m5i20 and Hostmot2. Also not sure if the encoder direction is the same. So first I would verify that the encoder direction and scaling are correct and if not fix them first. Then I would widen the ferror limits and check if the drives run away when enabled. If so the PWM scale needs to be reversed. > > > On Fri, May 23, 2014 at 11:37 AM, a k <pccncmach...@gmail.com> wrote: > >> hi >> interesting part is that yesterday when i start computer it give error >> that i post here. cnc window did not want to open and error was there. >> today same computer - everything same - start - open cnc widow with no >> problem. >> i even turn motor to see if encoder will move - yes and all encoders are >> connected right - figures in axis do change. >> only when i power machine on i getting ---joint 2 following error ---- >> looks like tuning problem but i put all ini file back. >> and those ---joint 2 following error ---- activated instantly after power >> on machine --F2-- >> >> why situation change overnight? by them self? >> and ---joint 2 following error ---- not just tuning problem but something >> else. >> How i can do that --their EEPROM >> data updated to the current---? >> >> i am not complaining. thank you for all help. maybe it consumer reflex - >> when thing is working it switch happiness On/Off. >> >> >> >> >> >> On Fri, May 23, 2014 at 5:54 AM, Peter C. Wallace <p...@mesanet.com> wrote: >> >>> On Fri, 23 May 2014, a k wrote: >>> >>>> Date: Fri, 23 May 2014 04:16:59 -0700 >>>> From: a k <pccncmach...@gmail.com> >>>> Reply-To: "Enhanced Machine Controller (EMC)" >>>> <emc-users@lists.sourceforge.net> >>>> To: "Enhanced Machine Controller (EMC)" < >>> emc-users@lists.sourceforge.net> >>>> Subject: Re: [Emc-users] emc2--2.5 >>>> >>>> hi >>>> i think that the situation where i am now - controller that does not >>> work- >>>> is good answer to question why i avoid to update to new releases of >>> emc2. >>>> >>>> >>>> why data for 5i20 was change during evaluation from 2.25 to 2.5? -it was >>>> working on emc2 2.25 just keep it same. >>>> >>>> so my board 5i20 is useless now - garbage? >>>> i have 2 of them! >>> >>> The 5I20 is unchanged and you can go back to 2.2.5 easily if you saved you >>> 2.2.5 installation >>> >>> The 5I20s that you have are old enough that they may need to have their >>> EEPROM >>> data updated to the current to be able to rum Hostmot2 firmware, but this >>> is >>> not clear because At one point you showed an error that indicated a card >>> access problem (FPGA reset issue) but then you said that you were able to >>> launch linuxCNC >>> >>> What is the curret situation with running linuxcnc 2.5? >>> >>> >>> Q >>>> >>>> >>>> >>>> On Thu, May 22, 2014 at 2:23 PM, a k <pccncmach...@gmail.com> wrote: >>>> >>>>> what should i do now? >>>>> there was reason that i like emc2.2 >>>>> >>>>> >>>>> On Thu, May 22, 2014 at 12:15 PM, Peter C. Wallace <p...@mesanet.com >>>> wrote: >>>>> >>>>>> On Thu, 22 May 2014, a k wrote: >>>>>> >>>>>>> Date: Thu, 22 May 2014 11:32:08 -0700 >>>>>>> From: a k <pccncmach...@gmail.com> >>>>>>> Reply-To: "Enhanced Machine Controller (EMC)" >>>>>>> <emc-users@lists.sourceforge.net> >>>>>>> To: "Enhanced Machine Controller (EMC)" < >>>>>> emc-users@lists.sourceforge.net> >>>>>>> Subject: Re: [Emc-users] emc2--2.5 >>>>>>> >>>>>>> i think i know >>>>>>> >>>>>>> >>>>>>> On Thu, May 22, 2014 at 11:29 AM, a k <pccncmach...@gmail.com> >>> wrote: >>>>>>> >>>>>>>> who is PCW? >>>>>>>> >>>>>>>> >>>>>>>> On Thu, May 22, 2014 at 11:18 AM, andy pugh <bodge...@gmail.com> >>>>>> wrote: >>>>>>>> >>>>>>>>> On 22 May 2014 19:06, a k <pccncmach...@gmail.com> wrote: >>>>>>>>>> [11380.125103] hm2_5i20.0: firmware: requesting >>> hm2/5i20/SVST8_4.BIT >>>>>>>>>> [11380.127460] hm2_5i20.0: FPGA did not reset: /INIT = 1, DONE = 1 >>>>>>>>> >>>>>>>>> OK, so you seem to have a config updated for the new driver, which >>> is >>>>>>>>> a good start. >>>>>>>>> I think we might need PCW to explain the problem above. >>>>>>>>> >>>>>> >>>>>> >>>>>> Not sure (especialliy if linuxCNC does load with drivers disabled) >>>>>> >>>>>> that error by itself may indicate very old EEPROM data on the 5I20 >>>>>> >>>>>> >>>>>>>>> >>>>>>>>> -- >>>>>>>>> atp >>>>>>>>> If you can't fix it, you don't own it. >>>>>>>>> http://www.ifixit.com/Manifesto >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>> >>> ------------------------------------------------------------------------------ >>>>>>>>> "Accelerate Dev Cycles with Automated Cross-Browser Testing - For >>> FREE >>>>>>>>> Instantly run your Selenium tests across 300+ browser/OS combos. >>>>>>>>> Get unparalleled scalability from the best Selenium testing >>> platform >>>>>>>>> available >>>>>>>>> Simple to use. Nothing to install. Get started now for free." >>>>>>>>> http://p.sf.net/sfu/SauceLabs >>>>>>>>> _______________________________________________ >>>>>>>>> Emc-users mailing list >>>>>>>>> Emc-users@lists.sourceforge.net >>>>>>>>> https://lists.sourceforge.net/lists/listinfo/emc-users >>>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> >>>>>> >>> ------------------------------------------------------------------------------ >>>>>>> "Accelerate Dev Cycles with Automated Cross-Browser Testing - For >>> FREE >>>>>>> Instantly run your Selenium tests across 300+ browser/OS combos. >>>>>>> Get unparalleled scalability from the best Selenium testing platform >>>>>> available >>>>>>> Simple to use. Nothing to install. Get started now for free." >>>>>>> http://p.sf.net/sfu/SauceLabs >>>>>>> _______________________________________________ >>>>>>> Emc-users mailing list >>>>>>> Emc-users@lists.sourceforge.net >>>>>>> https://lists.sourceforge.net/lists/listinfo/emc-users >>>>>>> >>>>>> >>>>>> Peter Wallace >>>>>> Mesa Electronics >>>>>> >>>>>> (\__/) >>>>>> (='.'=) This is Bunny. Copy and paste bunny into your >>>>>> (")_(") signature to help him gain world domination. >>>>>> >>>>>> >>>>>> >>>>>> >>> ------------------------------------------------------------------------------ >>>>>> "Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE >>>>>> Instantly run your Selenium tests across 300+ browser/OS combos. >>>>>> Get unparalleled scalability from the best Selenium testing platform >>>>>> available >>>>>> Simple to use. Nothing to install. Get started now for free." >>>>>> http://p.sf.net/sfu/SauceLabs >>>>>> _______________________________________________ >>>>>> Emc-users mailing list >>>>>> Emc-users@lists.sourceforge.net >>>>>> https://lists.sourceforge.net/lists/listinfo/emc-users >>>>>> >>>>> >>>>> >>>> >>> ------------------------------------------------------------------------------ >>>> "Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE >>>> Instantly run your Selenium tests across 300+ browser/OS combos. >>>> Get unparalleled scalability from the best Selenium testing platform >>> available >>>> Simple to use. Nothing to install. Get started now for free." >>>> http://p.sf.net/sfu/SauceLabs >>>> _______________________________________________ >>>> Emc-users mailing list >>>> Emc-users@lists.sourceforge.net >>>> https://lists.sourceforge.net/lists/listinfo/emc-users >>>> >>> >>> Peter Wallace >>> Mesa Electronics >>> >>> (\__/) >>> (='.'=) This is Bunny. Copy and paste bunny into your >>> (")_(") signature to help him gain world domination. >>> >>> >>> >>> ------------------------------------------------------------------------------ >>> "Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE >>> Instantly run your Selenium tests across 300+ browser/OS combos. >>> Get unparalleled scalability from the best Selenium testing platform >>> available >>> Simple to use. Nothing to install. Get started now for free." >>> http://p.sf.net/sfu/SauceLabs >>> _______________________________________________ >>> Emc-users mailing list >>> Emc-users@lists.sourceforge.net >>> https://lists.sourceforge.net/lists/listinfo/emc-users >>> >> >> > ------------------------------------------------------------------------------ > "Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE > Instantly run your Selenium tests across 300+ browser/OS combos. > Get unparalleled scalability from the best Selenium testing platform available > Simple to use. Nothing to install. Get started now for free." > http://p.sf.net/sfu/SauceLabs > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > Peter Wallace Mesa Electronics (\__/) (='.'=) This is Bunny. Copy and paste bunny into your (")_(") signature to help him gain world domination. ------------------------------------------------------------------------------ "Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available Simple to use. Nothing to install. Get started now for free." http://p.sf.net/sfu/SauceLabs _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
