On 18 September 2014 23:49, <[email protected]> wrote: > float OUT 10 motion.spindle-speed-out-abs ==> > spindle-vel-cmd-rpm-abs > float 0 spindle-vel-cmd-abs ==> > hm2_5i25.0.7i76.0.0.spinout
That looks a bit like a bug in PNCConf. > And now the spindle runs in linuxCNC. There is still an issue since it seems > doing an S setting in MDI isn't changing the speed. > I'm getting full speed in MDI m03/m04 regardless of my s command. In the > manual tab, if I click the spindle run button I'm either > getting full speed, or clicking the - button will drop it to a crawl, > probably 1V control voltage. This probably means that the scale in the INI file isn't quite right. The HAL file is referencing data in the [SPINDLE_9] section of the INI setp hm2_5i25.0.7i76.0.0.spinout-minlim [SPINDLE_9]OUTPUT_MIN_LIMIT setp hm2_5i25.0.7i76.0.0.spinout-maxlim [SPINDLE_9]OUTPUT_MAX_LIMIT setp hm2_5i25.0.7i76.0.0.spinout-scalemax [SPINDLE_9]OUTPUT_SCALE [SPINDLE_9]OUTPUT_SCALE probably needs to match the maximum spindle speed. -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ Slashdot TV. Video for Nerds. Stuff that Matters. http://pubads.g.doubleclick.net/gampad/clk?id=160591471&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
