I'm planning on using these pins: http://www.ebay.com/itm/141233257616 which are .053" in dia. with 5mm and .150" pitch.
I would like to connect to the pogos with a connector rather than soldering a wire. I would like the connector to be between two boards: http://wallacecompany.com/tmp/Screenshot_pogo1.png I recall some connectors used to connect board to board, where header pins from the bottom board pass through the bottom of the top board and into a connector on top. Does anyone have a link to such connectors? -- Kirk Wallace http://www.wallacecompany.com/machine_shop/ http://www.wallacecompany.com/E45/ ------------------------------------------------------------------------------ Comprehensive Server Monitoring with Site24x7. Monitor 10 servers for $9/Month. Get alerted through email, SMS, voice calls or mobile push notifications. Take corrective actions from your mobile device. http://p.sf.net/sfu/Zoho _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
