Could you use a tag cable? (there are other sources of the same thing.) We use them for programming. http://www.tag-connect.com/
Samtec makes header sockets that can come up through the bottom of the board. We use those too. SMD On Wed, Oct 15, 2014 at 3:50 PM, Kirk Wallace <kwall...@wallacecompany.com> wrote: > I'm planning on using these pins: http://www.ebay.com/itm/141233257616 > which are .053" in dia. with 5mm and .150" pitch. > > I would like to connect to the pogos with a connector rather than > soldering a wire. I would like the connector to be between two boards: > http://wallacecompany.com/tmp/Screenshot_pogo1.png > > I recall some connectors used to connect board to board, where header > pins from the bottom board pass through the bottom of the top board and > into a connector on top. Does anyone have a link to such connectors? > > -- > Kirk Wallace > http://www.wallacecompany.com/machine_shop/ > http://www.wallacecompany.com/E45/ > > > ------------------------------------------------------------------------------ > Comprehensive Server Monitoring with Site24x7. > Monitor 10 servers for $9/Month. > Get alerted through email, SMS, voice calls or mobile push notifications. > Take corrective actions from your mobile device. > http://p.sf.net/sfu/Zoho > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Comprehensive Server Monitoring with Site24x7. Monitor 10 servers for $9/Month. Get alerted through email, SMS, voice calls or mobile push notifications. Take corrective actions from your mobile device. http://p.sf.net/sfu/Zoho _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
