On Mon, 11 May 2015, Rick Lair wrote: > Date: Mon, 11 May 2015 11:14:30 -0400 > From: Rick Lair <[email protected]> > Reply-To: "Enhanced Machine Controller (EMC)" > <[email protected]> > To: "Enhanced Machine Controller (EMC)" <[email protected]> > Subject: Re: [Emc-users] Servo Motor Question > > > > On 5/11/2015 11:02 AM, Peter C. Wallace wrote: >> Non linear resolver output points to an overloaded input For a 7I49, I >> would check that the maximum resolver output voltage is less than 1V >> RMS (you need to rotate the shaft to find the peak on one or measure >> both sine and cosine and calculate the peak as sqrt(Sine^2+Cosine^2) > > I would do this with machine off, an measure at the individual leads > coming off of the resolver correct?
Yes On the other hand this is not something that would change, so if it is bad, it was always bad... > > > -- > > Thanks > > > Rick Lair > Superior Roll & Turning LLC > 399 East Center Street > Petersburg MI, 49270 > PH: 734-279-1831 > FAX: 734-279-1166 > www.superiorroll.com > > > ------------------------------------------------------------------------------ > One dashboard for servers and applications across Physical-Virtual-Cloud > Widest out-of-the-box monitoring support with 50+ applications > Performance metrics, stats and reports that give you Actionable Insights > Deep dive visibility with transaction tracing using APM Insight. > http://ad.doubleclick.net/ddm/clk/290420510;117567292;y > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > Peter Wallace Mesa Electronics (\__/) (='.'=) This is Bunny. Copy and paste bunny into your (")_(") signature to help him gain world domination. ------------------------------------------------------------------------------ One dashboard for servers and applications across Physical-Virtual-Cloud Widest out-of-the-box monitoring support with 50+ applications Performance metrics, stats and reports that give you Actionable Insights Deep dive visibility with transaction tracing using APM Insight. http://ad.doubleclick.net/ddm/clk/290420510;117567292;y _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
