Mechanical problem?
On Mon, 11 May 2015 11:10:52 -0400 Rick Lair <[email protected]> wrote: > Its Linuxcnc controlled, and has been running fine for over a year, the > operators started noticing a poor finish on the parts just as of recent. > The material is hardened D2 Tool steel, and we are using ceramic and > diamond inserts, so machine issues, even very small and non noticeable > on a piece of A-36 HR, stick out like a sore thumb on this material. > > > Rick > > > On 5/11/2015 11:05 AM, andy pugh wrote: > > On 11 May 2015 at 15:53, Rick Lair <[email protected]> wrote: > >> Any thoughts/ pointers as to what may be causing this? > > It sounds like the PID tuning might be off. Is this > > LinuxCNC-controlled or is it a standalone PID? > > > > -- > > Thanks > > > Rick Lair > Superior Roll & Turning LLC > 399 East Center Street > Petersburg MI, 49270 > PH: 734-279-1831 > FAX: 734-279-1166 > www.superiorroll.com > > > ------------------------------------------------------------------------------ > One dashboard for servers and applications across Physical-Virtual-Cloud > Widest out-of-the-box monitoring support with 50+ applications > Performance metrics, stats and reports that give you Actionable Insights > Deep dive visibility with transaction tracing using APM Insight. > http://ad.doubleclick.net/ddm/clk/290420510;117567292;y > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ One dashboard for servers and applications across Physical-Virtual-Cloud Widest out-of-the-box monitoring support with 50+ applications Performance metrics, stats and reports that give you Actionable Insights Deep dive visibility with transaction tracing using APM Insight. http://ad.doubleclick.net/ddm/clk/290420510;117567292;y _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
