I don't allow any screen savers, blanking, or power management on my Atom box. Until I did that it would crash randomly (very seldom). Make sure all power management is disabled in the BIOS as wll (but I think you know that)
Ray --J. Ray Mitchell Jr. [email protected] (818)324-7573 The dogmas of the quiet past, are inadequate to the stormy present. The occasion is piled high with difficulty, and we must rise with the occasion. As our case is new, so we must think anew and act anew. We must disenthrall ourselves, and then we shall save our country.*Abraham Lincoln <http://www.quotationspage.com/quotes/Abraham_Lincoln/>*, *Annual message to Congress, December 1, 1862* *16th president of US (1809 - 1865)* On Wed, May 13, 2015 at 2:38 PM, Gene Heskett <[email protected]> wrote: > On Wednesday 13 May 2015 13:17:05 Gene Heskett wrote: > > On Wednesday 13 May 2015 12:08:19 Gene Heskett wrote: > > > Greetings all; > > > > > > I left 2.6.7 running last night on the shop machine so I wouldn't > > > lose my home positions. It crashed sometime in the night, before > > > amdump ran. > > > > > > I am connecting the dots, and they point at 2.6.7. > > > > > > I'll get a good backup tonight, and the new install iso applied & > > > switch it to master in the next few days. > > > > > > I got the 5i25 card from PCW yesterday too, but haven't installed it > > > yet. So I must get printouts of the current ini and hal files for > > > conversion references. > > > > > > Master, 2.8.0pre1 something, seems to be dead stable on the lathe. > > > Essentially zero problems since I fixed the ini file to put it in a > > > known state at startup. > > > > > > Cheers, Gene Heskett > > > > PS: > > I went out and turned the monitor on, but the blanker must have > > kicked in before the crash, so I hit the reset button, and left it > > running 2.6.8 just for S&G. Otherwise the crash matched the lathes > > crashing on 2.6.7. Nothing contaminated if the blanketr hadn't kicked > > in, just no response to anything but the reset button. > > > > Gotta run. Dr appointment in half an hour, 20 minutes up the road. > > PS #2: > > Turned out I was a day early, so I went on around to see if I could find > some fresh 4mm,.70 taps. Struck out. Came home, tried to log back into > shop, crashed, and this was 2.6.8 that I left running, doing zip, but > running. > > So my finger gets pointed a bit mpore directly at the 2.6.7 and 2.6.8 as > being the cause of the crash. Until I left 2.6.7 running last night, > the uptime reading was in months. > > Am I the only one? > > Thanks guys. > > Cheers, Gene Heskett > -- > "There are four boxes to be used in defense of liberty: > soap, ballot, jury, and ammo. Please use in that order." > -Ed Howdershelt (Author) > Genes Web page <http://geneslinuxbox.net:6309/gene> > > > ------------------------------------------------------------------------------ > One dashboard for servers and applications across Physical-Virtual-Cloud > Widest out-of-the-box monitoring support with 50+ applications > Performance metrics, stats and reports that give you Actionable Insights > Deep dive visibility with transaction tracing using APM Insight. > http://ad.doubleclick.net/ddm/clk/290420510;117567292;y > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ One dashboard for servers and applications across Physical-Virtual-Cloud Widest out-of-the-box monitoring support with 50+ applications Performance metrics, stats and reports that give you Actionable Insights Deep dive visibility with transaction tracing using APM Insight. http://ad.doubleclick.net/ddm/clk/290420510;117567292;y _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
