Well PCW seemed pretty adamant that it would not work or at least not work safely enough. It has been awhile since the IRC conversation so I don't recall the actual details but the consensus was that I needed to move back to analog control.
Pete On Mon, Jun 15, 2015 at 12:11 PM, andy pugh <bodge...@gmail.com> wrote: > On 15 June 2015 at 16:30, Pete Matos <petefro...@gmail.com> wrote: > > Last I looked into this I have to remove > > the modbus control from the spindle and wire it back to analog control. > > Have not done that yet. > > Why not try it without doing that? It will either work, or it won't. > > > -- > atp > If you can't fix it, you don't own it. > http://www.ifixit.com/Manifesto > > > ------------------------------------------------------------------------------ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > -- Pete Matos A and N Precision and Fabrication Maryville, Tennessee 865-236-8996 ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
