Nice job! N. Christopher Perry
> On Jun 15, 2015, at 9:45 AM, Chris Kelley <tensait...@gmail.com> wrote: > > Well, we had to make a little circuit board to convert the Fanuc spindle > analog pulse generator signals to digital quadrature pulses and I mounted > an optical sensor to read a flag on the spindle to make an index pulse. > > Anyway, the machine now rigid taps. > > Very first chips made since the conversion began were testing rigid tapping > in 1/4" polycarbonate with a 1/4"-20 tap: > https://youtu.be/dvdWepZ5o8Q > > > >> On Fri, Jun 5, 2015 at 2:23 PM, Gene Heskett <ghesk...@wdtv.com> wrote: >> >>> On Friday 05 June 2015 12:59:56 Rick Lair wrote: >>> I do build from source, >>> >>> So should I have the VMC folder be in my >>> "home/testpc/linuxcnc-dev/configs directory, >>> >>> Then from the command line be in the >>> "testpc@testpc:~/linuxcnc-dev/configs$" directory, >>> >>> Then do " sudo halcompile --install --install-doc carousel.comp" >>> >>> Does that sound right? >> >> You may have to edit your .bashrc's PATH to include /usr/bin >> >> or, since you'll be using root $PATH, do >> >> sudo /usr/bin/halcompile --install -- install-doc carousel.comp >> >>>> On 6/5/2015 12:41 PM, Sebastian Kuzminsky wrote: >>>>> On 6/5/15 10:38 AM, andy pugh wrote: >>>>>> On 5 June 2015 at 17:34, Rick Lair <r...@superiorroll.com> wrote: >>>>>> Now I get "sudo: halcompile: command not found", >>>>> >>>>> Wierd. >>>>> sudo apt-get install linuxcnc-dev >>>>> Might help, but I didn't think that was necessary, and I would >>>>> imagine you already have it. >>>> >>>> Yes, halcompile is part of the linuxcnc-dev package (or in your >>>> run-in-place path, if you build from source). >> >> Cheers, Gene Heskett >> -- >> "There are four boxes to be used in defense of liberty: >> soap, ballot, jury, and ammo. Please use in that order." >> -Ed Howdershelt (Author) >> Genes Web page <http://geneslinuxbox.net:6309/gene> >> >> >> ------------------------------------------------------------------------------ >> _______________________________________________ >> Emc-users mailing list >> Emc-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/emc-users >> > ------------------------------------------------------------------------------ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users