Hi Sven. It is a small machine but in any case I suggest to you to use a plc in stead on LCNC. I mean it is possibile to do it even with LCNC but will be much difficult. I did many injection molding machine retrofit (the electric and Electronic and software part) and a plc+hmi is the much confortable solution. Realtime is needed as per machine cycle control (you have to be deterministic for a precise and reliable control). A 10ms task can be acceptable. I personally made a hw and sw package with Schneider Electric plc M258 and hmi Magelis GTO 10"" touch screen plus a software Application that I personally developed. But if you have time to spend and less money you cam try LCNC + MODBUS IO . ;-)
----- Messaggio originale ----- Da: "Karlsson & Wang" <nicklas.karls...@karlssonwang.se> Inviato: 22/09/2015 15:56 A: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> Oggetto: Re: [Emc-users] A lot of input/output. Cheap > > Hi Sven. > > Can you send a picture of the machine you have to retrofit ? > > Is it an injection moulding machine ? > > If yes how many tons is the closing clamp force and how many heating zones > > have the injection barrel/chamber ? > > > > Regards. > > > > Alex > > > > Here you go. > https://c2.staticflickr.com/6/5652/20606563013_d2a911f7e7_b.jpg > > It's a really nice machine, a Stübbe that has been running extremely fine > moulds. I can even rotate the moulding line to vertical position. I am > actually thinking of ripping the machine a part and make a new base with > the clamps fixed in vertical position to save space. I also have an old injection mould machine I plan to retrofit. But I also have other problems power supply is limited so fuses will before correct pressure is reached. ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
