I'd say the smallest touch panel you could get would be twice the price of a good PC...
On 9/22/2015 12:25 PM, Karlsson & Wang wrote: >> Hi Sven. >> It is a small machine but in any case I suggest to you to use a plc in stead >> on LCNC. >> I mean it is possibile to do it even with LCNC but will be much difficult. >> I did many injection molding machine retrofit (the electric and Electronic >> and software part) and a plc+hmi is the much confortable solution. >> Realtime is needed as per machine cycle control (you have to be >> deterministic for a precise and reliable control). >> A 10ms task can be acceptable. >> I personally made a hw and sw package with Schneider Electric plc M258 and >> hmi Magelis GTO 10"" touch screen plus a software Application that I >> personally developed. >> But if you have time to spend and less money you cam try LCNC + MODBUS IO . >> ;-) > I would say HMIs are quite exensive comparted to slightly outdated PC, what > do you say about that? > > ------------------------------------------------------------------------------ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
