ClassicLadder is just as good as a PLC for this kind of machine... On 9/22/2015 12:08 PM, Alex Chiosso wrote: > Hi Sven. > It is a small machine but in any case I suggest to you to use a plc in stead > on LCNC. > I mean it is possibile to do it even with LCNC but will be much difficult. > I did many injection molding machine retrofit (the electric and Electronic > and software part) and a plc+hmi is the much confortable solution. > Realtime is needed as per machine cycle control (you have to be deterministic > for a precise and reliable control). > A 10ms task can be acceptable. > I personally made a hw and sw package with Schneider Electric plc M258 and > hmi Magelis GTO 10"" touch screen plus a software Application that I > personally developed. > But if you have time to spend and less money you cam try LCNC + MODBUS IO . > ;-) > > > > ----- Messaggio originale ----- > Da: "Karlsson & Wang" <nicklas.karls...@karlssonwang.se> > Inviato: 22/09/2015 15:56 > A: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> > Oggetto: Re: [Emc-users] A lot of input/output. Cheap > >>> Hi Sven. >>> Can you send a picture of the machine you have to retrofit ? >>> Is it an injection moulding machine ? >>> If yes how many tons is the closing clamp force and how many heating zones >>> have the injection barrel/chamber ? >>> >>> Regards. >>> >>> Alex >>> >>> Here you go. >> https://c2.staticflickr.com/6/5652/20606563013_d2a911f7e7_b.jpg >> >> It's a really nice machine, a Stübbe that has been running extremely fine >> moulds. I can even rotate the moulding line to vertical position. I am >> actually thinking of ripping the machine a part and make a new base with >> the clamps fixed in vertical position to save space. > I also have an old injection mould machine I plan to retrofit. But I also > have other problems power supply is limited so fuses will before correct > pressure is reached. > > ------------------------------------------------------------------------------ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users
------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
