It is either throw out the door or retrofit it to run a couple of more years. I might even rip it in pieces and use some of the parts to make a smaller vertical machine.
2015-09-22 19:37 GMT+02:00 Alex Chiosso <achio...@gmail.com>: > If you would like a 'personal" usage machine you can try what ever > Solution should work. > But if you are searching For a reliable industrial grade Solution you have > to spend some Money. This is my experience on that specific argument. > Sometimes cheap is not good. ;-) > > ----- Messaggio originale ----- > Da: "Karlsson & Wang" <nicklas.karls...@karlssonwang.se> > Inviato: 22/09/2015 19:28 > A: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> > Oggetto: Re: [Emc-users] R: A lot of input/output. Cheap > > > Hi Sven. > > It is a small machine but in any case I suggest to you to use a plc in > stead on LCNC. > > I mean it is possibile to do it even with LCNC but will be much > difficult. > > I did many injection molding machine retrofit (the electric and > Electronic and software part) and a plc+hmi is the much confortable > solution. > > Realtime is needed as per machine cycle control (you have to be > deterministic for a precise and reliable control). > > A 10ms task can be acceptable. > > I personally made a hw and sw package with Schneider Electric plc M258 > and hmi Magelis GTO 10"" touch screen plus a software Application that I > personally developed. > > But if you have time to spend and less money you cam try LCNC + MODBUS > IO . ;-) > > I would say HMIs are quite exensive comparted to slightly outdated PC, > what do you say about that? > > > ------------------------------------------------------------------------------ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > > ------------------------------------------------------------------------------ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
