Thanks Andy.
>You could try "cat /proc/ioports" though I suspect it will give the
same answer as you already have.
bill@CNC:~$ cat /proc/ioports
0000-0cf7 : PCI Bus 0000:00
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-0060 : keyboard
0064-0064 : keyboard
0070-0077 : rtc0
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
03c0-03df : vga+
03f8-03ff : serial
04d0-04d1 : pnp 00:0b
0680-069f : pnp 00:06
0a00-0a0f : pnp 00:09
0a20-0a2f : pnp 00:09
0a30-0a3f : pnp 00:09
0cf8-0cff : PCI conf1
0d00-ffff : PCI Bus 0000:00
164e-164f : pnp 00:06
1800-18fe : pnp 00:06
1800-1803 : ACPI PM1a_EVT_BLK
1804-1805 : ACPI PM1a_CNT_BLK
1808-180b : ACPI PM_TMR
1820-182f : ACPI GPE0_BLK
1850-1850 : ACPI PM2_CNT_BLK
1854-1857 : pnp 00:08
1c00-1cfe : pnp 00:06
1d00-1dfe : pnp 00:06
1e00-1efe : pnp 00:06
1f00-1ffe : pnp 00:06
d000-dfff : PCI Bus 0000:04
d000-d007 : 0000:04:00.0
d010-d017 : 0000:04:00.0
e000-efff : PCI Bus 0000:02
e000-e0ff : 0000:02:00.0
e000-e0ff : r8169
f000-f03f : 0000:00:02.0
f040-f05f : 0000:00:1f.3
f060-f07f : 0000:00:1f.2
f060-f07f : ahci
f080-f083 : 0000:00:1f.2
f080-f083 : ahci
f090-f097 : 0000:00:1f.2
f090-f097 : ahci
f0a0-f0a3 : 0000:00:1f.2
f0a0-f0a3 : ahci
f0b0-f0b7 : 0000:00:1f.2
f0b0-f0b7 : ahci
ffff-ffff : pnp 00:06
ffff-ffff : pnp 00:06
ffff-ffff : pnp 00:06
>Does the linuxCNC parport driver load?
bill@CNC:~$ loadrt hal_parport cfg="0"
bash: loadrt: command not found
>Does lsmod show "lp" ? That might suggest that something has grabbed your port.
It does sho lp.
bill@CNC:~$ lsmod
Module Size Used by
parport_pc 21896 0
ppdev 12591 0
lp 12767 0
parport 35208 3 lp,ppdev,parport_pc
bnep 17186 2
rfcomm 36117 0
bluetooth 166348 10 bnep,rfcomm
rfkill 18403 2 bluetooth
uinput 17057 1
nfsd 202675 2
nfs 277039 0
nfs_acl 12464 2 nfs,nfsd
auth_rpcgss 32226 2 nfs,nfsd
fscache 35490 1 nfs
lockd 56898 2 nfs,nfsd
sunrpc 151263 6 nfs,nfsd,auth_rpcgss,lockd,nfs_acl
loop 21832 0
snd_hda_codec_realtek 53766 1
snd_hda_intel 25789 1
snd_hda_codec 79439 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 12911 1 snd_hda_codec
snd_pcm 69181 2 snd_hda_codec,snd_hda_intel
snd_page_alloc 12842 2 snd_pcm,snd_hda_intel
snd_seq 43338 0
snd_seq_device 12981 1 snd_seq
iTCO_wdt 16918 0
snd_timer 22188 2 snd_pcm,snd_seq
snd 46731 10
snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_pcm,snd_seq,snd_hda_codec,snd_hda_intel,snd_seq_device
evdev 17099 14
psmouse 67176 0
video 17461 0
serio_raw 12734 0
iTCO_vendor_support 12586 1 iTCO_wdt
button 12818 0
coretemp 12771 0
i2c_i801 16788 0
i2c_core 23097 1 i2c_i801
soundcore 12891 1 snd
crc32c_intel 12625 0
ext4 270189 1
crc16 12328 2 ext4,bluetooth
jbd2 54294 1 ext4
mbcache 12899 1 ext4
usbhid 39608 0
hid 72252 1 usbhid
sg 25482 0
sd_mod 43403 3
crc_t10dif 12333 1 sd_mod
fan 12595 0
thermal_sys 17699 2 fan,video
microcode 17386 0
r8169 49478 0
mii 12596 1 r8169
ahci 24918 2
libahci 22312 1 ahci
libata 152992 2 ahci,libahci
ehci_hcd 43561 0
scsi_mod 125436 3 sg,libata,sd_mod
xhci_hcd 80023 0
usbcore 124257 4 ehci_hcd,usbhid,xhci_hcd
usb_common 12339 1 usbcore
Sorry if I give too much info. It is still pretty foreign to me.
------------------------------------------------------------------------------
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
