Hi Andy, I fixed the typos.
Linux ports 0 and 1 did not work. 0x378 seemed to load (it did not give error message). I still cannot make the motor turn if I set Parport Base Address to 0x378 in Stepconf Wizard. halcmd: loadrt hal_parport cfg="0" Error: could not insert module /usr/realtime-3.4-9-rtai-686-pae/modules/linuxcnc/hal_parport.ko: No such device <stdin>:3: exit value: 1 <stdin>:3: insmod for hal_parport failed, returned -1 See the output of 'dmesg' for more information. halcmd: loadrt hal_parport cfg="1" Error: could not insert module /usr/realtime-3.4-9-rtai-686-pae/modules/linuxcnc/hal_parport.ko: No such device <stdin>:4: exit value: 1 <stdin>:4: insmod for hal_parport failed, returned -1 See the output of 'dmesg' for more information. halcmd: loadrt hal_parport cfg="0x378" bill@CNC:~$ dmesg [ 344.629510] config string '0' [ 344.630112] PARPORT: ERROR: linux parport 0 not found [ 350.869180] config string '1' [ 350.869752] PARPORT: ERROR: linux parport 1 not found [ 376.501674] config string '0x378' [ 473.293668] RTAI[math]: unloaded. [ 473.294579] SCHED releases registered named ALIEN PEDV$D [ 473.300000] RTAI[malloc]: unloaded. [ 473.396940] RTAI[sched]: unloaded (forced hard/soft/hard transitions: traps 0, syscalls 0). [ 473.397846] I-pipe: head domain RTAI unregistered. [ 473.397880] RTAI[hal]: unmounted. ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
