Hi Andy, Here is the hal load for port 0 and 1. They both don't load. I would assume I am connected to linux "0" since they have different errors.
FYI: Last night I swapped card ports to see if this was this issue. bill@CNC:~/Desktop$ halrun halcmd: loadrt hal_parport cfg-"0" Error: could not insert module /usr/realtime-3.4-9-rtai-686-pae/modules/linuxcnc/hal_parport.ko: Unknown symbol in module <stdin>:1: exit value: 1 <stdin>:1: insmod for hal_parport failed, returned -1 See the output of 'dmesg' for more information. dmesg (searched for "parport") [ 141.692879] hal_parport: Unknown parameter `cfg-"0" bill@CNC:~/Desktop$ halrun halcmd: loadrt hal_parport cfg="1" Error: could not insert module /usr/realtime-3.4-9-rtai-686-pae/modules/linuxcnc/hal_parport.ko: No such device <stdin>:1: exit value: 1 <stdin>:1: insmod for hal_parport failed, returned -1 See the output of 'dmesg' for more information. dmesg (searched for "parport") [ 141.692879] hal_parport: Unknown parameter `cfg-"0"' [ 514.660394] PARPORT: ERROR: linux parport 1 not found ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
