How to set dec? And what was it in prior versions? On Tue, Dec 8, 2015 at 7:49 PM, andy pugh <bodge...@gmail.com> wrote:
> On 8 December 2015 at 23:25, Peter C. Wallace <p...@mesanet.com> wrote: > > Possible software fixes are having the driver ignore this error (as > apparently > > 2.6 does) > > There are parameters for smartserial that allow you to mask errors. > Set dec > inc and the threshold for error reporting will never be hit. > > Every servo thread the error count is decremented by dec, and is > incrmented by inc if there is an error. If the threshold is hit, then > an error is reported and the smart-serial port stops. > > -- > atp > If you can't fix it, you don't own it. > http://www.ifixit.com/Manifesto > > > ------------------------------------------------------------------------------ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
